Packaged air conditioning unit

Reference ID for this specific instance (e.g. 'WWS/VS1/400/001', which indicates the occurrence belongs to system WWS, subsystems VSI/400, and has the component number 001).

Reference ID for this specified type in this project (e.g. type 'A-1').

Specification clause or section code/reference.

Name of the specification system being used.

Specification clause or section title.

Published version of the classification system.

Article number or reference that may be applied to a product according to a standard scheme for article number definition (e.g. UN, EAN).

The name of the manufactured item as used by the manufacturer.

The model number and/or unit designator assigned by the manufacturer of the manufactured item.

The identity of the bar code given to an occurrence of the product.

The serial number assigned to an occurrence of a product.

The identity of the batch reference from which an occurrence of a product is taken.

The Global Trade Item Number (GTIN) is an identifier for trade items developed by GS1 (www.gs1.org).

The date that the manufactured item was purchased.

The length or duration of a service life. The lower bound indicates pessimistic service life, the upper bound indicates optimistic service life, and the setpoint indicates the typical service life.

The average time duration between instances of failure of a product.

The identifier assigned to a warranty.

The date on which the warranty commences.

The date on which the warranty expires.

Indication of whether this is an extended warranty whose duration is greater than that normally assigned to an artefact (=TRUE) or not (= FALSE).

The time duration during which a manufacturer or supplier guarantees or warrants the performance of an artefact.

The content of the warranty.

Items, conditions or actions that may be excluded from the warranty or that may cause the warranty to become void.

Date on which the overall condition is assessed.

The overall condition of a product based on an assessment of the contributions to the overall condition made by the various criteria considered. The meanings given to the values of assessed condition should be agreed and documented by local agreements. For instance, is overall condition measured on a scale of 1 - 10 or by assigning names such as Good, OK, Poor.

Qualitative description of the condition.

The name of the person, organisation or library provider that created the object.

URL hyperlink to the object creator’s website.

To record the last date of issue (version or revision) of the object within an object library. Add the date in the following format <yyyymmdd.no> where the ‘no’ suffix is equal to the number of times the object has been issued on that date. For example 20180316.01.

URL hyperlink to the manufacturer’s website.

URL hyperlink to further product information, such as technical documentation or installation guides.

Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).

The organization that manufactured and/or assembled the item.

Enumeration defining where the assembly is intended to take place, either in a factory or on the building site.

The organization that should be contacted for action under the terms of the warranty. Note that the role of the organization (manufacturer, supplier, installer etc.) is determined by the IfcActorRole attribute of IfcOrganization.

The number of live lines that is intended to be handled by the device.

Indicates whether the electrical device has a protective earth connection (=TRUE) or not (= FALSE).

Details of available accessories.

TRUE if the coil has sound attenuation, FALSE if it does not.

Weight of the element.

IP Code, the International Protection Marking, IEC 60529), classifies and rates the degree of protection provided against intrusion.

IK Code according to IEC 62262 (2002) is a numeric classification for the degree of protection provided by enclosures for electrical equipment against external mechanical impacts. > NOTE  In earlier labeling, the third numeral (1..) had been occasionally added to the closely related IP Code on ingress protection, to indicate the level of impact protection.

To record any defects found.

Table of sound frequencies and sound power measured in decibels at a reference power of 1 picowatt(10^(-12) watt) for the referenced octave band frequency.

Flow rate of outside air entering the PackagedACUnit per the manufacturer's listing (if available)

The current that a device is designed to handle.

The voltage that a device is designed to handle.

The upper and lower limits of frequency for which the operation of the device is certified.

The ratio between the rated electrical power and the product of the rated current and rated voltage.

Function of a line conductor to which a device is intended to be connected where L1, L2 and L3 represent the phase lines according to IEC 60446 notation (sometimes phase lines may be referenced by color [Red, Blue, Yellow] or by number [1, 2, 3] etc). Protective Earth is sometimes also known as CPC or common protective conductor. Note that for an electrical device, a set of line conductor functions may be applied.

Insulation standard classes provides basic protection information against electric shock. Defines levels of insulation required in terms of constructional requirements (creepage and clearance distances) and electrical requirements (compliance with electric strength tests). Basic insulation is considered to be shorted under single fault conditions. The actual values required depend on the working voltage to which the insulation is subjected, as well as other factors. Also indicates whether the electrical device has a protective earth connection.

The maximum allowed current that a device is certified to handle.

The current that a device is actually handling or is calculated to be handling at a point in time.

The range of allowed voltage that a device is certified to handle. The upper bound of this value is the maximum.

The output power rating that is certified for a device.

The angular difference between two waveforms of the same frequency.

The phase identification used for the device electrical input. This should be the same phase identifier that is used for the conductor segment providing the electrical service to the device. In general, it is recommended that IEC recommendations for phase identification are used (L1, L2 etc.). However, other phase identifiers may be used such as by color (Red, Blue, Yellow) or by number (1, 2, 3) etc.

Reference to a database or a classification.

The unit of the quantity the environmental indicators values are related with.

The whole life cycle or only a given phase from which environmental data are valid.

Expected service life in years.

Quantity of energy used as defined in ISO21930:2007.

Quantity of water used.

Quantity of hazardous waste generated.

Quantity of non hazardous waste generated.

Quantity of greenhouse gases emitted calculated in equivalent CO2.

Quantity of gases responsible for the atmospheric acidification calculated in equivalent SO2.

Quantity of renewable energy used as defined in ISO21930:2007.

Quantity of non-renewable energy used as defined in ISO21930:2007.

Quantity of resources used calculated in equivalent antimony.

Quantity of inert waste generated.

Quantity of radioactive waste generated.

Quantity of gases destroying the stratospheric ozone layer calculated in equivalent CFC-R11.

Quantity of gases creating the photochemical ozone calculated in equivalent ethylene.

Quantity of eutrophicating compounds calculated in equivalent PO4.

Quantity of energy used as defined in ISO21930:2007.

Quantity of water used.

Quantity of hazardous waste generated.

Quantity of non hazardous waste generated.

Quantity of greenhouse gases emitted calculated in equivalent CO2.

Quantity of gases responsible for the atmospheric acidification calculated in equivalent SO2.

Quantity of renewable energy used as defined in ISO21930:2007.

Quantity of non-renewable energy used as defined in ISO21930:2007.

Quantity of resources used calculated in equivalent antimony.

Quantity of inert waste generated.

Quantity of radioactive waste generated.

Quantity of gases destroying the stratospheric ozone layer calculated in equivalent CFC-R11.

Quantity of gases creating the photochemical ozone calculated in equivalent ethylene.

Quantity of eutrophicating compounds calculated in equivalent PO4.

Fire rating identifying the entity's fire resistive value (e.g., 1-hour, 2-hour, etc.) so that its resistance to fire can be compared to that of the surrounding structure.

Combustibility (YES it is combustible or NO it is not combustible).

Surface spread of flame characteristics.

Flow rate of fluid through the condenser per manufacturer's listing (if available)

Sensible cooling capacity of the PackagedACUnit per ARI Standards 210/240, 270, 275, 360, 340 and 365.

Latent cooling capacity of the PackagedACUnit per ARI Standards 210/240, 270, 275, 360, 340 and 365.

Coefficient of Performance: Ratio of cooling energy output to energy input under full load operating conditions per ARI Standards 210/240, 270, 275, 360, 340 and 365.

Heating capacity of the PackagedACUnit per ARI Standards 210/240, 270, 275, 360, 340 and 365 for heat pumps, AFUE for fuel burning and NEMA for electric heat.

Heating efficiency of the PackagedACUnit under full load heating conditions per ARI Standards 210/240, 270, 275, 360, 340 and 365 for heat pumps, AFUE for fuel burning and NEMA for electric heat.

Temperature of fluid entering condenser per manufacturer's listing (if available)

Termperature of fluid leaving condenser per manufacturer's listing (if available)

The year of production of the manufactured item.

Lead in time before start of process.

Duration of process.

Lead out time after end of process.