A pile is a slender timber, concrete, or steel structural element, driven, jetted, or otherwise embedded on end in the ground for the purpose of supporting a load. A pile is also characterized as deep foundation, where the loads are transfered to deeper subsurface layers.
Jet-grout pile
A jet grout pile is an injected pile-like construction.
IFC 2x3 note
For IFC2x3 use the PredefinedType enumerator of USERDEFINED.
IfcElementType | IfcPile | =IfcExportAs |
---|---|---|
IfcPredefinedType | JETGROUTING | =IfcExportType |
Suggested Filename: | Pile_JetGrout | |
Suggested LOD (Design Model) | 300 | |
Suggested Primary Discipline | Structural |
Source
Property Categories
Classification(Select the classification you'd like to be included in the Excel export)
Masterformat | |
---|---|
NatspecWorksection | |
Omniclass Table 21 Elements | |
Omniclass Table 22 Work Results | |
Omniclass Table 23 Products | |
Uniclass Elements | |
Uniclass Products | |
Uniclass Systems | |
Uniformat |
property | source | description | |
---|---|---|---|
Admin data | |||
CreatedBy | NATSPEC BIM | The name of the person, organisation or library provider that created the object. | |
CreatedByURL | NATSPEC BIM | URL hyperlink to the object creator’s website. | |
ModifiedIssue | NATSPEC BIM | To record the last date of issue (version or revision) of the object within an object library. Add the date in the following format <yyyymmdd.no> where the ‘no’ suffix is equal to the number of times the object has been issued on that date. For example 20180316.01. | |
ObjectType | IfcPile (IFC2x3) | Required for PredefinedType of USERDEFINED Complete value with: JETGROUTING | |
Reference | Pset_PileCommon (IFC4) | Reference ID for a specified type in a project (e.g. type 'A-1'). Also known as Construction type. Provide as an alternative to the name of the object type, if software does not support object types. | |
Construction logistics data | |||
ConstructionMethod | NATSPEC BIM | ||
GrossWeight | Qto_PileBaseQuantities (IFC4)NATSPEC BIM | ||
NetWeight | Qto_PileBaseQuantities (IFC4) | Takes all openings or recesses into account. | |
Status | Pset_PileCommon (IFC4) | Status of the object, predominately used in renovation or retrofitting projects. Complete value with: NEW, EXISTING, DEMOLISH, TEMPORARY, OTHER, NOTKNOWN or UNSET | |
Cost data | |||
AdditionalTax | NATSPEC BIM | ||
AssemblyCost | NATSPEC BIM | ||
AssetAccountingType | Pset_Asset (IFC4)Pset_Asset (IFC2x3) | Asset type for accounting purposes. Complete value with: FIXED, NONFIXED, OTHER, NOTKNOWN or UNSET (PEnum_AssetAccountingType) | |
AssetInsuranceType | Pset_Asset (IFC4)Pset_Asset (IFC2x3) | Type of insurance rating. Complete value with: PERSONAL, REAL, OTHER, NOTKNOWN or UNSET (PEnum_AssetInsuranceType) | |
AssetTaxType | Pset_Asset (IFC4)Pset_Asset (IFC2x3) | Type of taxation group. Complete value with: CAPITALISED, EXPENDED, OTHER, NOTKNOWN or UNSET (PEnum_AssetTaxType) | |
ConceptualCost | NATSPEC BIM | ||
CostOverRun | NATSPEC BIM | ||
FutureCostAssumptions | NATSPEC BIM | ||
InstallationCost | NATSPEC BIM | ||
InstalledCost | NATSPEC BIM | ||
PurchaseInformation | NATSPEC BIM | ||
RecordedActualCost | NATSPEC BIM | ||
TotalOwnershipCost | NATSPEC BIM | ||
Facilities management data | |||
AccessibilityPerformance | COBie_ElementTypeCOBie_Specification | Accessibility issue(s) that product satisfies. | |
AcquisitionDate | Pset_ManufacturerOccurrence (IFC4)Pset_ManufacturerOccurrence (IFC2x3) | Date the item was purchased (Format: YYYY-MM-DD). | |
AssessmentCondition | NATSPEC BIMPset_Condition (IFC4) | Overall condition rating based on assessment. Rating scale to be agreed prior (e.g. Good, OK , Poor). | |
AssessmentDate | Pset_Condition (IFC4) | Date of overall condition assessment (Format: YYYY-MM-DD). | |
AssessmentDescription | Pset_Condition (IFC4) | Qualitative description of the condition. | |
AssetIdentifier | COBie_Component | Alternative identifier for specific component, used as defined by contract. | |
AssetType | COBie_AssetCOBie_ElementType | Complete value with: 'Fixed' or 'Movable' | |
Category | COBie | Classification code. | |
CodePerformance | COBie_ElementTypeCOBie_Specification | Code compliance requirement(s) that product satisfies. | |
ComponentID | NATSPEC BIM | ||
Constituents | COBie_ElementTypeCOBie_Specification | Details of various parts of the object. | |
Description | COBie | Concise description of the object. | |
DurationUnit | COBie | Units used to record expected life duration. Typically ‘year’. | |
Exclusions | Pset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Items, conditions or actions that may be excluded from the warranty or that may cause the warranty to become void. | |
ExpectedLife | NATSPEC BIMCOBie | Expected serviceable life of object. | |
Features | COBie_ElementTypeCOBie_Specification | Primary features or important characteristics of the product. | |
Grade | COBie_ElementTypeCOBie_Specification | Standard grading(s) to which the product corresponds. | |
InstallationDate | NATSPEC BIMCOBie_Component | Format: YYYY-MM-DD. | |
IsExtendedWarranty | Pset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Complete value with: TRUE or FALSE (IfcBoolean) | |
ModelNumber | COBie | Model number or designator of the product model (or product line) as assigned by the manufacturer. | |
Name | COBie | Unique human readable name for object type. | |
ReplacementCost | NATSPEC BIMCOBie_EconomicImpactValuesCOBie_ElementType | Cost to replace product. | |
Shape | COBie_ElementTypeCOBie_Specification | Characteristic shape of the object. e.g. Square. | |
SustainabilityPerformance | COBie_ElementTypeCOBie_Specification | Sustainability issue(s) that product satisfies. | |
TagNumber | COBie_Component | Tag number for product or equipment at installation. | |
WarrantyContent | NATSPEC BIMPset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Description of what is included in warranty. | |
WarrantyDescription | COBie_Warranty | Concise description of warranty content and any items, conditions or actions that are excluded from warranty or that will cause the warranty to become void. | |
WarrantyDurationLabor | COBie_Warranty | Duration of labour warranty. | |
WarrantyDurationParts | COBie_Warranty | Duration of parts warranty. | |
WarrantyDurationUnit | COBie | Units used to record warranty durations. Typically ‘year’. | |
WarrantyEndDate | NATSPEC BIMPset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Format: YYYY-MM-DD. | |
WarrantyGuarantorLabor | COBie_Warranty | email address for organisation responsible for labour warranty. | |
WarrantyGuarantorParts | COBie_Warranty | email address for organisation responsible for parts warranty. | |
WarrantyIdentifier | Pset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Identifier assigned to warranty. | |
WarrantyPeriod | Pset_Warranty (IFC4)Pset_Warranty (IFC2x3) | ||
WarrantyStartDate | NATSPEC BIMCOBie_ComponentPset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Format: YYYY-MM-DD. | |
Geometric data | |||
CrossSectionArea | NATSPEC BIMQto_PileBaseQuantities (IFC4) | ||
CutOffLevel | NATSPEC Spec | ||
GrossSurfaceArea | Qto_PileBaseQuantities (IFC4) | ||
GrossVolume | NATSPEC BIMQto_PileBaseQuantities (IFC4) | ||
Length | NATSPEC BIMQto_PileBaseQuantities (IFC4)NATSPEC Spec | ||
NetVolume | Qto_PileBaseQuantities (IFC4) | Takes all openings or recesses into account. | |
NominalHeight | COBie_ElementTypeCOBie_Specification | Typically the vertical characteristic dimension of the object. | |
NominalLength | COBie_ElementTypeCOBie_Specification | Typically the primary or larger of the two perpendicular horizontal dimensions of the object. | |
NominalWidth | COBie_ElementTypeCOBie_Specification | Typically the secondary or smaller of the two perpendicular horizontal dimensions of the object. | |
OuterSurfaceArea | Qto_PileBaseQuantities (IFC4) | ||
Size | COBie_ElementTypeCOBie_Specification | ||
ToeLevel | NATSPEC Spec | ||
Manufacturer data | |||
Accessories | NATSPEC BIM | Details of available accessories. | |
ArticleNumber | Pset_ManufacturerTypeInformation (IFC4)Pset_ManufacturerTypeInformation (IFC2x3) | Reference applied to product, according to scheme for article number definition defined by manufacturer. Often used as purchasing number. | |
AssemblyPlace | Pset_ManufacturerTypeInformation (IFC4) | Defines where assembly is to take place. Complete value with: SITE, FACTORY or NOTDEFINED (IfcAssemblyPlaceEnum) | |
BarCode | COBiePset_ManufacturerOccurrence (IFC4)Pset_ManufacturerOccurrence (IFC2x3) | Bar code given to occurrence of the product. | |
BatchReference | Pset_ManufacturerOccurrence (IFC4)Pset_ManufacturerOccurrence (IFC2x3) | Identity of the batch from which the occurrence of the product is taken. | |
Defects | NATSPEC BIM | To record any defects found. | |
GlobalTradeItemNumber | Pset_ManufacturerTypeInformation (IFC4) | GTIN is an identifier for trade items developed by GS1 (www.gs1.org). | |
Manufacturer | COBieNATSPEC BIMPset_ManufacturerTypeInformation (IFC4)Pset_ManufacturerTypeInformation (IFC2x3) | Name of the manufacturer (or assembler). | |
ManufacturerURL | NATSPEC BIM | URL hyperlink to the manufacturer’s website. | |
ModelLabel | Pset_ManufacturerTypeInformation (IFC4) | The descriptive model name of the product model (or product line) as assigned by the manufacturer of the manufactured item. | |
ModelLabel | Pset_ManufacturerTypeInformation (IFC2x3) | The model number and/or unit designator assigned by the manufacturer of the manufactured item. | |
ModelReference | Pset_ManufacturerTypeInformation (IFC4) | The model number or designator of the product model (or product line) as assigned by the manufacturer of the manufactured item. | |
ModelReference | Pset_ManufacturerTypeInformation (IFC2x3) | The name of the manufactured item as used by the manufacturer. | |
OrderNumber | NATSPEC BIM | ||
PointOfContact | Pset_Warranty (IFC4)Pset_Warranty (IFC2x3) | Organization that should be contacted for action under the terms of the warranty. | |
ProductionYear | Pset_ManufacturerTypeInformation (IFC4)Pset_ManufacturerTypeInformation (IFC2x3) | ||
SerialNumber | COBiePset_ManufacturerOccurrence (IFC4)Pset_ManufacturerOccurrence (IFC2x3) | Serial number assigned to an occurrence of a product. | |
Performance data | |||
CapacityBendingMomentX | NATSPEC Spec | ||
CapacityBendingMomentY | NATSPEC Spec | ||
CapacityHorizontalLoad | NATSPEC Spec | ||
CapacityVerticalLoad | NATSPEC Spec | ||
DeadLoad | NATSPEC BIM | ||
DesignBendingMomentX | NATSPEC Spec | ||
DesignBendingMomentY | NATSPEC Spec | ||
DesignServiceabilityHorizontalLoad | NATSPEC Spec | ||
DesignServiceabilityVerticalLoad | NATSPEC Spec | ||
DesignUltimateHorizontalLoad | NATSPEC Spec | ||
DesignUltimateVerticalLoad | NATSPEC Spec | ||
GroutStrength | NATSPEC Spec | ||
LiveLoad | NATSPEC BIM | ||
Scheduling data | |||
InstallationSequence | NATSPEC BIM | ||
InstallationTime | NATSPEC BIM | ||
LeadTime | NATSPEC BIM | ||
Spatial and location data | |||
GISTag | NATSPEC BIM | ||
GPSTag | NATSPEC BIM | ||
Specification data | |||
Color | COBie_ElementTypeCOBie_Specification | ||
ExposureClassification | NATSPEC Spec | ||
Finish | COBie_ElementTypeCOBie_Specification | Specification of surface finish. | |
LoadBearing | Pset_PileCommon (IFC4) | Indicates if object is intended to carry loads. Complete value with: TRUE or FALSE (IfcBoolean) | |
Material | NATSPEC BIMCOBie_ElementTypeCOBie_Specification | ||
SpecificationCode | NATSPEC BIM | ||
SpecificationSystem | NATSPEC BIM | ||
SpecificationTitle | NATSPEC BIM | ||
Sustainability data | |||
CarbonFootprint | NATSPEC BIM | ||
ItemIsPartiallyRecycled | NATSPEC BIM | ||
ItemIsRecycled | NATSPEC BIM | ||
PostConsumerRecycledContent | NATSPEC BIM | ||
PostIndustrialRecycledContent | NATSPEC BIM | ||
PreConsumerRecycledContent | NATSPEC BIM | ||
RecycledContent | NATSPEC BIM |